HDMI Port Repair PS5
PS5
Symptoms: no signal on the TV even though the console powers on, a picture that flickers or cuts out, or a port that feels loose or has bent pins.
- Damaged port desoldered and a new port fitted and soldered to the board
- Board joints checked for lifted pads or damaged traces
Tested before pickup: picture and audio confirmed on a shop monitor.
HDMI Port Repair PS4
PS4
Symptoms: “no signal” from the TV, a flickering or snowy picture, or a worn port where the cable no longer sits firmly.
- Old port removed and a new port fitted and soldered to the board
- Board joints checked for lifted pads or damaged traces
Tested before pickup: picture and audio confirmed on a shop monitor.
HDMI Port Repair Xbox Series X
Xbox Series X
Symptoms: no picture or a signal that drops in and out, especially after the cable was pulled or tripped over, or a visibly damaged port.
- Damaged port desoldered and a new port fitted and soldered to the board
- Board joints checked for lifted pads or damaged traces
Tested before pickup: picture and audio confirmed on a shop monitor.
HDMI Port Repair Xbox Series S
Xbox Series S
Symptoms: no picture or an intermittent signal that comes and goes, usually after a cable yank or a fall.
- Damaged port desoldered and a new port fitted and soldered to the board
- Board joints checked for lifted pads or damaged traces
Tested before pickup: picture and audio confirmed on a shop monitor.
Ethernet Port Repair
Consoles
Symptoms: wired internet is dead or drops constantly, or the Ethernet cable no longer clicks in — often bent pins inside the port.
- Worn or damaged LAN port replaced and soldered to the board
- Port pins and board joints inspected
Tested before pickup: stable wired connection confirmed.
USB Port Repair
Consoles
Symptoms: the port no longer charges controllers, won’t read a USB drive, or doesn’t recognise wired accessories.
- Faulty USB port replaced and soldered to the board
- Port pins and board joints inspected
Tested before pickup: charging and data confirmed on the bench.
Advanced trace/pad repair (HDMI add-on)
+$20 add-on
An add-on, not a repair on its own. When a damaged HDMI port has also torn its pads or traces off the board, a straight port swap won’t hold — the traces and pads have to be rebuilt first. We only add this when the board on the bench actually needs it, and we confirm it with you before the extra work starts.
- Lifted pads and damaged traces rebuilt so the new port seats correctly
- Added on top of one of the standard HDMI port repairs above